ice cold beer start button light out.

cleverlyj

Well-known member

Donor 2011
Joined
Aug 6, 2003
Messages
14,653
Reaction score
513
Location
Northglenn, Colorado
as it says, the light doesn't work. bulb is good. i am getting no voltage to the socket. checked pins 11/12 on the game harness side of the connector and am not getting voltage there either. looking at the board diagram it indicates that the bulb signal comes from pin V on connector J1 and the other end is 6vdc. what would be the next step, to probe pin V and see if i am getting anything from it?
 
as it says, the light doesn't work. bulb is good. i am getting no voltage to the socket. checked pins 11/12 on the game harness side of the connector and am not getting voltage there either. looking at the board diagram it indicates that the bulb signal comes from pin V on connector J1 and the other end is 6vdc. what would be the next step, to probe pin V and see if i am getting anything from it?

That would be good but You might just ohm out the connector to the bulb. They are probably good. I would pull j1 and put voltage to the pins that go to the bulb to see if the connections are good and if the light lights up. Then you will have a good starting point, a working connection and bulb. If that works then you know something is wrong at input to the connector.
 
Back
Top Bottom