Ice Cold Beer Sideart, Gonna Happen?

There's videos on youtube - but the short jist is you have a pinball that rolls on an armature that you control the left/right/up/down movements. The game will light up a specific hole and your job is to get the ball into the hole avoiding all the other holes because the board looks like swiss chees.
 
...The game will light up a specific hole and your job is to get the ball into the hole avoiding all the other holes because the board looks like swiss chees.

Swiss Cheese? More like "beer bubbles"!!!

This is great news Chris!!! Glad this is going to happen now I can restore the ICB sitting in my garage. ;)
 
Anyone that's interested in sideart for their machine needs to send a pm to myself or Audiomidiman. The cost is gonna be about $75 plus shipping for the set and this will be a very limited run that most likely will never be run again by us.
 
Here are some photos.

ICBImage3.jpg

ICBRetouchedArt3.jpg

ICBScannedArt1.jpg

ICB_test1.jpg

ICB_test2.jpg
 
Rich will have the final say on this but this will most likely be a very small one time run. Looks nice Bill and for all the hard work you put into this project, i'm glad i bought the machine for you to work from. Enjoy your restoration and the game is yours for free my good man.
 
Rich will have the final say on this but this will most likely be a very small one time run. Looks nice Bill and for all the hard work you put into this project, i'm glad i bought the machine for you to work from. Enjoy your restoration and the game is yours for free my good man.

Well... looks like I'll have to make sure I have some money set aside for a set or two... The sides of my machine are acceptable now, but there's no telling what the future holds.
 
Rich will have the final say on this but this will most likely be a very small one time run. Looks nice Bill and for all the hard work you put into this project, i'm glad i bought the machine for you to work from. Enjoy your restoration and the game is yours for free my good man.

The cabinet is patiently awaiting the test prints so it can be stripped, bondo'ed, new paint and vinyl installed!!!

Chris, thanks for inspiring me to work on this project. Sorry it took 1-2 months longer than predicted. Damn clients and wanting everything right way!
 
Back
Top Bottom