FS Parts: Ice Cold Beer Side Art... Who still needs it?

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Rating - 100%
58   0   0
Rich Lint is getting ready to run me another "small run" of Ice Cold Beer side art and wants to have a better idea of how much to run. First of all, it's solvent so running the side art "as needed" is not a problem... However, this interest list is for the side art with a clear UV ink screened over the print in order to make the colors "pop"... IMO... It makes the art really needs the clear coat.

So, who's holding out? Who's dragging their feet? So far I have an interest list with about 5 sets. Rich is going to start printing this week and screening next week.

ICB_Applied_Art1.jpg
 
Bill, I know I told you I'd take 2 sets, but go ahead and put me down for 3. Good to have extra sets on hand just in case something happens to the machine like somebody bumps up against it wearing a sharp belt or something like that...(yes, I've had that happen before).
 
Ok, based on some e-mails and PM's this is who I have down right now.

pinjunky - 1x
gregbl - 3x

Eventually the following are interested but just not high on their priority list.

nutballchamp - 1x
Pinwizkid - 1x
 
bill, i know i told you i'd take 2 sets, but go ahead and put me down for 3. Good to have extra sets on hand just in case something happens to the machine like somebody bumps up against it wearing a sharp belt or something like that...(yes, i've had that happen before).

thats the kind of reason not a single person has walked into my arcade.. Ever...I WOULD HAVE A STROKE.
 
thats the kind of reason not a single person has walked into my arcade.. Ever...I WOULD HAVE A STROKE.

No kidding...I've almost had to implement a body check before I allow people near my machines. Any kids all continually get told to "wash your hands before you play any game, especially if you just had something to eat or drink." Thankfully the damage has been extremely minimal and all easily repairable.

And I'm one of those guys that is very protective and anal-retentive about his games looking pristine.
 
Hey Bill...what's the latest on the re-run of the ICB side-art?

Thanks,
Greg
 
Hmmm, now I wonder what kind of shape the ICB I have access to is in. Sideart could use replacing. Probably the CPO as well but I didn't look at it. If I don't end-up ordering while you have 5 left, will you be making more? It's not my machine so I'm not even sure I'd ever get my hands on it so I'm not worried about it.
 
Back
Top Bottom