ice cold beer help...

sdoyle23

Member
Joined
Jul 12, 2009
Messages
221
Reaction score
7
Location
malden, Massachusetts
hey all,
i have an icb that is as slow as shit.
here's what i've done:
replaced the motors
replaced the belts
lubed the shit out of all the rods and the gear box.
any suggestions?
thanks,
-s
 
first, take the bars off of the metal brackets that the telescoping ball rod connects to, and clean the inside of it with something to make sure there isn't any gummed up grease in there. also - take the belts off the motors and see if the motors move faster when they're free.

if not, you want to check for 12v, which is what drives the motors. if you don't have enough voltage, that could cause it. i would check connector p3, pins n, 10, 11, and 12 for +12 to drive the motors. just have the meter on that and the ground to ground, and have someone operate the corresponding stick to check for voltage coming out.

page 52 and some of the other pages here have the schematics that tell you where to look.

http://arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/Ice Cold Beer.pdf

also, if you still have issues, pm riptor. he's very knowledgeable about ice cold beer.
 
Back
Top Bottom