ICADE China pcb trackball?

rknucklez

Active member
Joined
Dec 4, 2007
Messages
1,817
Reaction score
19
Location
New Jersey
I can get the trackball to work in the setup/menu system but not in the game..
I don't have the manual, anyone know how to enable the trackball on these pcbs?
Not a big fan but peeps like 1942 and Gunsmoke all of a sudden..

Thanks
 
if you can move the star around on the 3rd screen of the menu, then it should work in the game. no idea why you want it to work for 1942 or Gunsmoke...
 
hahaha, silly rabbit

just explaining why my upscale arcade is using a lame-o multi pcb...

the trac-ball does not work in Centipede or Millipede but will work on the test menu..

dunno wassup
 
the trac-ball does not work in Centipede or Millipede but will work on the test menu..

dunno wassup



Ok, I figured out my own problem. I got this pcb in on a trade with no manual.

There are virtual dip switches which can only be changed within the test menu. My cab is jamma wired with an arcadeshop multipanel with joystick and trac-ball.
The pcb was set internally to run - UR with 2 controls... after some trial and error, the correct seting for my setup was UR with 1 control. makes no sense to me, but hell, now it works..

hopefully this info will help someone else down the road.

~RK
 
See, that's the kind of obvious stuff you don't think to ask, and that I would see automatically were I standing there looking at it. Glad it's working now...
 
Back
Top Bottom