icade 60 in 1 help

jonblackbelt

New member
Joined
Feb 4, 2010
Messages
16
Reaction score
0
Location
Airdrie, ab, Canada
My icade powers up and my jamma connector is wired proper (checked a hundred times) when I hit my player 1 button, the color changes on my screen as does the 2 player button when I push it. My joystick and jump button don't work at all. The pcb board has the led 2 light blinking. Please help this noob again.
 
Sounds like you have the video ground on the chassis connected to the regular ground on the harness. Make sure it's connected to the video ground pin on the harness.

And make sure you have the ground from the switches connected to the ground on the power supply (thru the harness or directly)...
 
Back
Top Bottom