I,Robot

jetusenet

Well-known member

Donor 4 years: 2011, 2013-2014, 2024
Joined
Feb 26, 2006
Messages
7,234
Reaction score
743
Location
Staten Island, New York
Rating - 100%
111   0   1
Hi;
I am contemplating selling my prized I,Robot - numbers matching (cabinet, power supply, monitor, board-set).

The Disco monitor has been capped.

The switching power supply has been completely rebuilt.

The board-set has been completely rebuilt as well: Replaced all RAM sockets and RAM. Replaced all electrolytic caps. Replaced Masked ROM with EPROM. Has original Quad Pokey.

Power is supplied to the PCB set via quick connect 18ga. red/green connections directly to the test points for reliability, very tastefully done.

Completely rebuilt Atari stick Hall Effect joystick.

Control panel had a small crack on the right side hand area but was repaired with fiberglass on the inside, also reinforced the left side as well.

Reproduction control panel instruction cards and decals.

NOS Atari LED buttons with aluminum black anodized cones.

The cabinet is not perfect but not bad. This would also include a reproduction cardboard surround decal.

I don't have any pictures available as of now but intend on posting them by Monday.

Shoot me a PM if you are interested.

Thanks
Jeff
 
Back
Top Bottom