I really think my Pole Position just WANTS to be Mamed.

tbbk

Well-known member
Joined
Oct 30, 2001
Messages
15,402
Reaction score
109
Location
Missouri
I really think my Pole Position just WANTS to be Mamed.

My Pole Position cockpit was working with graphics problems, and rigged to run off a single AR II board that of course wasn't putting out enough voltage. Built a power spider deal and bypassed the edge connector and it pretty much kept working the way it was previously.

Then the steering stopped working.

Then I repaired the bad AR II of the pair and got the voltages right and everything.

Worked with graphics problems. Steering didn't work.

Turned it off. Tried another optic board in it. And now it won't come up at all.

It is like the thing is just begging me to put a computer in it.
 
PolePos

Mine's MAME'd...kept the original optic board for steering and pot for the pedal (and compiled MAME to use the shifter properly), waiting for Adam's replacement/re-engineered PCB, but in the meantime, it at least plays (and gets quite a bit pf play actually) :)
 
Back
Top Bottom