I need the pinouts for a Galaga 88 wiring kick harness

Shawn1976

Well-known member

Donor 10 years: 2016-2025
Joined
Apr 17, 2008
Messages
8,767
Reaction score
460
Location
Saint Augustine, Florida
I need the pinouts for a Galaga 88 wiring kick harness

I am trying to pin out a jamma harness for my Galaga 88 board and I'm having a little trouble.
I have the original manual, but it is in japanese.
Does someone here have an english pinout breakdown of the 28-pin jamma harness?
Any help would be appreciated.
Thanks
 
about to buy this myself. i beleive its just a regular jamma haness since galaga 88 is a jamma board,
 
Looking at the manual, I don't think so.
I think the pinouts for the movement and coining up the game are different at least from the manual is showing.
Can anyone clerify this please?
 
I looked at the Jamma cable and the galaga88 While part of it is in english the other parts are in Japaneses. I am just guessing the the parts Not translated are for the joystick pin outs.
 
Well, I'll know for sure here in the next couple of months when I wire out my Galaga 88.
Just wanted to see if someone has already done so, so that I don't have to go wire by wire. :(
 
Just a reminder that the board is capable of stereo sound. There's a jumper for mono/stereo and a small header you can pull the left/right audio from. Both are located at the top corner of the board near the edge connector.

I run my board (thanks again Todd!) in a Japanese candy cab. I used an old PC CD drive cable to attach to the header, then I soldered on a couple phono plugs on the other end to connect to my cab.
 
If anyone is interested, I did finally get to setting up my Galaga 88 PCB and it is Jamma wired exactly to standard Jamma connections. :)
 
Back
Top Bottom