I need some boards for my Ek pin.

ARCredux

New member
Joined
Mar 12, 2008
Messages
1,391
Reaction score
5
Location
Detroit, Michigan
Anyone have any working or non working boards for a bally evel knievel? If so please let me know. I'm not having luck with ebay and am hoping for a klov bargain. I'm pretty sure I will need all the boards that go to the machine.

So if you have anything please pm me with a price and condition. My evel knievel will thank you from the bottom of it's non working heart.

No one seems to want to buy it non working because of various reasons...and then the other response is "shipping it will kill the deal".

So now i'm hoping to find some donor boards for a transplant.

Either outright purchase...or possible trade for boards on my vaps.

Let me know fellow pinheads.
 
Lindsey,

I think I need everything for the backbox. When I got it they said only the lamp driver was present. I know I can go the alltek route, but was thinking keeping it original might be a somewhat cheaper alternative if I can source the boards on klov.

Let me know if you have any of what I'm needing.


Thanks!
 
Lindsey,

I think I need everything for the backbox. When I got it they said only the lamp driver was present. I know I can go the alltek route, but was thinking keeping it original might be a somewhat cheaper alternative if I can source the boards on klov.

Let me know if you have any of what I'm needing.


Thanks!

Luckily that game uses chimes so you'll only need the MPU and regulator/driver board assuming that the transformer and rectifier board are there.

I can sell you an MPU with NVRAM (no batteries), better than original reset circuit, etc... for $110 shipped. You can likely find something cheaper on ebay but I know mine will be reliable. I have no spare driver boards to sell right now.
 
Luckily that game uses chimes so you'll only need the MPU and regulator/driver board assuming that the transformer and rectifier board are there.

I can sell you an MPU with NVRAM (no batteries), better than original reset circuit, etc... for $110 shipped. You can likely find something cheaper on ebay but I know mine will be reliable. I have no spare driver boards to sell right now.

I might have a driver board....
 
Luckily that game uses chimes so you'll only need the MPU and regulator/driver board assuming that the transformer and rectifier board are there.

I can sell you an MPU with NVRAM (no batteries), better than original reset circuit, etc... for $110 shipped. You can likely find something cheaper on ebay but I know mine will be reliable. I have no spare driver boards to sell right now.

Sure as hell sounds like a "KLOV Bargain" to me, for a rather bullet-proofed original board. A few I've seen on a local collectors site ranged from $85-$100 without shipping, and they were simply "working".

I can't even find a driver for under $80 shipped, might if I looked harder though.
 
Ok I'm saving up some cash for this project. I know lindsey has the MPU i'm after. Does any one else have the following boards laying around? I'm trying to gauge how much more to save up.


AS-2518-14 Lamp driver

As-2518-15 Display driver

AS-2518-16 Solenoid Driver


Please PM with pics and prices.

Thank you
 
hey pm me
i have my evel knevil working
and i have some boards that were not working
i can let go real cheap
and since we are close you can pick them up and not need to pay shipping
let me look them up this weekend, but i do know they are not working.

let me know what you need, i even have displays.

ty
frank
 
Back
Top Bottom