I need my DK/DK Jr/ Mario Bros Namco PCB repaired. Anybody?

lojack44

New member
Joined
Feb 27, 2011
Messages
49
Reaction score
0
Location
Tempe, Arizona
I need my DK/DK Jr/ Mario Bros Namco PCB repaired. Anybody?

I bought a dedicated cabinet that had never been opened until a few days ago by myself. Minty on the inside, only problem is I'm getting nothing from the board, no indicator lights or anything. And this board is difficult to find. Can anyone on here help bring it back to life? ��
 

Attachments

  • IMG_1353.jpg
    IMG_1353.jpg
    533.2 KB · Views: 15
Last edited:
I'm in the same boat with a similar pcb (2000 namco ms pacman/galaga).

All this new hi-end tech is all SMT (surface mount technology) and everything on 1 chip, atmel, cpu, eprom, etc...

there's really not many places to test, or replace these IC's.
Some of them so custom, it's easier (cheaper) just to get a replacement board.

I'm curious to know if anyone out there has any input to this... thanks!
 

Attachments

  • namco-ms-pacman-galaga-reunion-pcb.jpg
    namco-ms-pacman-galaga-reunion-pcb.jpg
    49.1 KB · Views: 5
Have you made sure that you are getting the proper voltages to it? There are door interlocks and fuses that you can check. The power supply may be an issue also.
 
Yeah I'm sure. I've hooked up another jamma board into the cabinet and it works, and I hooked this one into a MS PAC/ Galaga Class of 81 cabinet and it gets no signal from the board
 
Back
Top Bottom