I Need help with gti club pcb

LOLAS

New member
Joined
Aug 30, 2009
Messages
38
Reaction score
0
Location
DHERYNIA, none, Cyprus
I have a konami GTI CLUB pcb that pass the rom/ram test OK and motor/wheel test Ok and after that won't start the game and restart again and again.Check the voltage on the pcb and i put it 5V on pcb.Any idea what this problem is?
 
Need help with gti club pcb

I have a konami GTI CLUB pcb that have ic 36v and 36t bad.I have replace ic 36v,36t .Didn't work.Check the voltage on the pcb and i put it 5V on pcb.Any idea what this problem is?
 
i need help with gti club pcb

I have a konami GTI CLUB pcb that pass the rom/ram test OK and motor/wheel test Ok and after that won't start the game and restart again and again.Check the voltage on the pcb and i put it 5V on pcb.Any idea what this problem is?

No "error" or "bad" messages.If i power it up on my bench pass the rom/ram test everything good and after is the wheel test that i don't use on my bench .After finish the time for the wheel test i have to pres the test button and go to game mode.If i pres the test button it won't go to test menu and restart again.
 
Back
Top Bottom