I have some Ice Cold Beer / Zeke's Peak Woodgrain Vinyl...

ChompingQuarters

Well-known member
Joined
Oct 18, 2006
Messages
10,196
Reaction score
68
Location
Clinton Township, Michigan
Rating - 100%
58   0   0
I have some Ice Cold Beer / Zeke's Peak Woodgrain Vinyl...

About a month or so ago I received a small roll of the woodgrain vinyl that I used (and Chris25810 used as well). I DO NOT HAVE MUCH!!! However, I will not know exactly how much I have until I start to unroll it! The woodgrain is more of a cherry finish over what Taito used but in my opinion it looks much better than the original (personal opinion). You would get two 72" x 26" pieces (or one 72" x 52" wide piece at the same price if you'd prefer to trim yourself. If I remember right the edge of the vinyl wasn't supper sticky so you'd need to make sure you avoid the edges when installing but there is plenty of overlap.

I'm thinking $60-$70 + shipping. If your interested shoot me a PM and I'll start unrolling next week.

ICB_3.jpg


Link to Chris's restoration
http://www.coinopspace.com/profiles/blogs/an-ice-cold-basket-case

Link to my restoration
http://www.chompingquarters.com/2010/10/“the-dirty-beer-wench”-puts-on-makeup

The following are the people interested... I'll start cutting later in the week and try to gauge how much I have left.

alejandromad
Flynn54321 (Waiting to hear back)
gregbl
oppolo
kspiff
bomber187
dclem
 
Last edited:
I'll start rolling up in the next few days... Need to get some 30" boxes/tubes... If you need your 6' pieces as one piece let me know so I find you a 5' long box...

Expect shipping to be around $10ish.
 
Thanks for offering this Bill. Not easy stuff to come by and we are all going to have spiffy looking ICB games thanks to your efforts with the artwork!!!!
 
Sorry for the delay... Will have time this week and will contact each one of you that have showed interest. It's 50" wide so I need to unroll 6 feet (will need to double check the height of my ICB) and then cut it down the center so it will ship easier... You will have two 25" wide pieces (I think it's 25"... either way, you'll have enough to cover the width of your ICB/ZP)
 
Well... The good news is... I finally went through the three rolls of vinyl... The bad news is that there isn't enough to go around due to a few pieces/rolls being short.

Basically I have enough for 4 machines (basically you get 2-pieces that are about 2' wide x 6' tall).

I also have ONE PIECE that is 4'8" tall x approximately 50" wide (not tall enough for an ICB).

I'd TRUELY like this to only go to someone who currently has a machine that they are planing on restoring. This is slightly out of my control. However, if you are on the list and do not have a machine you plan on restoring then please consider letting it go to the someone else on the list.

Pricing is $75 (PayPal Gift) or $80 (if you don't want to send payment as a gift) for one machines worth.

I will disclose one again that the woodgrain IS NOT the same that Taito used but looks great IMO. Also, you have "enough" overhand... "HOWEVER"... one edge is a little dried out/discolored so please take your time to make sure it is properly lined up before applying the vinyl... Even with this dried out/discolored edge you still have plenty!

Here is the first four in line... I will send PM's as well with my paypal information. If you are not interested please let me know ASAP. I'll give the first four members through Monday to give an answer then I'll go down the list.

alejandromad - PAID
gregbl - PENDING PAYMENT (out of town)
oppolo - PAID
bomber187


Next up....

dclem
shirkle
mahnomen


No longer need...

kspiff
Flynn54321 (Never heard back from)


Thanks and sorry that I don't have more. :(
 
Last edited:
Put me down as a "next up" in case you ever find more. I still have your ICB repro side art waiting to be put onto a nicer looking cabinet. If vinyl never becomes available again, I might have to go the woodgrain laminate route.
 
Eh, you can drop me off the list of people in line. I don't have a ICB, was just picking up the restoration materials while they are available in case I manage to find one down the road. And I can always get vinyl or laminate from a different source.
 
eh, you can drop me off the list of people in line. I don't have a icb, was just picking up the restoration materials while they are available in case i manage to find one down the road. And i can always get vinyl or laminate from a different source.

done!

put me down too....

done!

put me down as a "next up" in case you ever find more. I still have your icb repro side art waiting to be put onto a nicer looking cabinet. If vinyl never becomes available again, i might have to go the woodgrain laminate route.

done!
 
Thanks Bill. I'm back from vacation (sunburnt as well)...payment sent for this.

Thanks,
Greg Blaum
 
Back
Top Bottom