I have googled till my fingers bleed. please help with EM part

[colesdad]

I have googled till my fingers bleed. please help with EM part

bally freedom EM. one of my three poppers is dead. looked and found that the metal bracket holding the solenoid is broken causing the solenoid to just hang there. please point me in the right direction to buy one!

 

[Spybryon]

bally freedom EM. one of my three poppers is dead. looked and found that the metal bracket holding the solenoid is broken causing the solenoid to just hang there. please point me in the right direction to buy one!

You need the part number or looking for a place to buy it?

If you just need the part number I maybe able to look it up in a Bally catalog I have here. What year is it?

 

[colesdad]

not exactly sure of the year. I know it is the last year before the Freedom machine went to SS. I have the manual but it doesn't show that part. I'm looking for a place to buy it.
it's my first pin. I just popped the lid an hour ago looking at the popper. I figured while I'm in here I'll look for the issue of the "spinning core change" not working...but that's a different post for a different day!

 

[Half Life]

Anything on this page look like what you need?

http://www.planetarypinball.com/reference/partsmanuals/BLY_Parts_1979/index.html#/70/#/70/

 

[colesdad]

Anything on this page look like what you need?

http://www.planetarypinball.com/reference/partsmanuals/BLY_Parts_1979/index.html#/70/#/70/

yes. on page 75. the illustration on the bottom left. I need the bracket. it looks like the bracket is labeled "core plug assembly". is this part the metal bracket ONLY? I don't need the entire shabang, justthe bracket.

 

[kguenther6]

http://www.marcospecialties.com/pinball-parts/A-613-30

 

[colesdad]

http://www.marcospecialties.com/pinball-parts/A-613-30

no,not that. it's the bracket holding the solenoid under the popper, not under the kicker.

 

[KenLayton]

Use this bracket to replace the broken one. It's what I use.

http://www.marcospecialties.com/pinball-parts/B-7417

Here's one exactly like yours, but it's out of stock:

http://bayareaamusements.com/Mercha..._Code=BAA&Screen=PROD&Product_Code=BM-B-7417R

 

[AlienInferno]

+1 to the above.

That's the same part I had to replace on my Freedom machine.

 

[colesdad]

Use this bracket to replace the broken one. It's what I use.

http://www.marcospecialties.com/pinball-parts/B-7417

Here's one exactly like yours, but it's out of stock:

http://bayareaamusements.com/Mercha..._Code=BAA&Screen=PROD&Product_Code=BM-B-7417R

excellent, thank you!