I give up, need U3000 repair

Cyberwhiz

New member
Joined
Aug 5, 2007
Messages
83
Reaction score
0
Location
Braselton, Georgia
I have a WG U3000 that keeps blowing the HOT. I've done a cap kit, replaced several parts on the power supply board and verified correct power output, replaced connectors, replaced the flyback and the transistor that's mounted to the frame, etc. No change: the monitor powers up, I get a neck glow, no raster, and poof!, another HOT bites the dust. It's time to pay someone who knows more than I do for their time so I can quit wasting my time. I've repaired many monitors, but this one is obviously over my head.

If anyone does repairs or can recommend someone who does, please pm me. Include total price (assuming flyback is ok, of course) including return shipping to 30548. I will send the main chassis, neckboard, PS and ext. transistor.

One caveat, no matter how easy the fix is, please tell me it was the most difficult repair you ever made. :)

Thanks
 
I could certainly take care of the poltergeist haunting your chassis. it would get repaired and reconditioned afterwards.. $110 shipped without a flyback $140.00 without.. take off -$10 since you already changed the lytic caps. or if you want, i could send off a reconditioned one in a couple of days for $140.00 .. it will have a new flyback.. i normally dont do this however i happen to have a personal p805 27" extra set at the shop now.. so if that is exactly what you have then i could do that.. otherwise you will have to send in the original if its a 33", standard rez or medium 27 /33"
 
Last edited by a moderator:
Back
Top Bottom