Museum of the Game® & International Arcade Museum® Forums

It turns out that my neck of the woods here is a CRT desert, but I finally found a tube that's compatible with the 19 inch k7000. Unfortunately it's a 20 inch so I don't know if it will fit the frame that the 80s Williams cabinets used.

Any advice on how to mount a CRT that won't fit into the cabinets original hardware?


P.s. the inductance readings for this tube are as follows:

1.9 mH Horizontal
18.8 mH Vertical
Both measured at 1 kHz.
Back
Top Bottom