I dont know what else to check....

TheDrewster

Well-known member

Donor 2012
Joined
Oct 5, 2008
Messages
7,668
Reaction score
314
Location
Reno, Nevada
Alright, Defender is kicking my ass worse than the big gangster guy did when I was a freshman in HS. I cant get anything to show up for the life of me.

Background: I used this Defender's tube to fix my Centipede. The chassis is currently laying in my scrap heap. So now, I wanted to make sure this boardset and power supply worked. I have the board hooked to my Centipede monitor (a G07) and all I get is what you see in the attached video below.

Foreground: I have managed to connect the H and V sync on the Defender molex to the negative terminals on the G07 and I still get the same screen. I am 95% sure they are hooked up correctly. The ROM board gives the 4 light blink indicating that the unit passes self test. I have checked all the voltages going to the CPU board and ROM board as well as reseated everything twice, including the processor and the video encoders. The only thing I havent reseated is the RAM because the lights dont indicate any RAM errors.

I am at a loss for what to do next.

 
Alright, Im gonna say you got rug, but it is hard to say if it is a 'proper' rug since your hsync is not locking. You need to adjust the hsync until the screen locks on.

Just my $0.02 worth,
Saltbreez
 
Back
Top Bottom