Zinfer
Well-known member
I picked one of these up a while ago. I thought it was complete but after looking over some pics and docs apparently the guy kept all the minigrabbers. I also appear to be missing that wire that leads from the probe to another minigrabber.
I found some minigrabbers on ebay and ordered 6 of them. But I'm going to have to find that wire with round hp connectors on it for the probe itself.
However, my main question is that I have a Tempest PCB I'm working on, and I'd like to learn how to use this Signature Analyzer. I think the Tempest docs have a section on hooking up a CAT box and has some signatures listed per IC and pin.
However I'm unsure where to clip the Start, Stop, Clock wires to get these signatures. Can someone help that's familiar with the hp 5006a and Atari/game pcb repair?
I used a multimeter on the X and Y outputs and no voltage at all is coming through. It plays completely blind with no video signals. I tried piggy backing all TL082's, 1495's and DAC08 with no success.
I found some minigrabbers on ebay and ordered 6 of them. But I'm going to have to find that wire with round hp connectors on it for the probe itself.
However, my main question is that I have a Tempest PCB I'm working on, and I'd like to learn how to use this Signature Analyzer. I think the Tempest docs have a section on hooking up a CAT box and has some signatures listed per IC and pin.
However I'm unsure where to clip the Start, Stop, Clock wires to get these signatures. Can someone help that's familiar with the hp 5006a and Atari/game pcb repair?
I used a multimeter on the X and Y outputs and no voltage at all is coming through. It plays completely blind with no video signals. I tried piggy backing all TL082's, 1495's and DAC08 with no success.