how to set playerchoice to freeplay???

wowyour speaking alien to me...dip??? Thanks a million for the manual its amazing but im still lost a little more 3rd grade for me if you would
 
he means dip switch on the motherboard, there are a row of small switches, one of them has to be selected on or off to be on freeplay, manual should say which one, and the manual is available on the interwebs
 
No worries Zen. People here will help you.
The Dip Switch are a small row of switches (up or down) on the main PC10 board. They will be in a row together. Like a little box.
Anyway, read the manual under Dip Switch settings. There should be something about freeplay. It may say something like...
Freeplay : Dip 3 ON
so then you would go to your 3rd (THIS IS JUST A GUESS, DIP 3 IS NOT FOR SURE THE CORRECT ONE) switch and push it to on. Then power back on the game and you should be set.
Hope that helps.
 
ok since im a newbie to all this a picture is worth a thousand words....anyone got one? i hate having to manually click the coin lever to get time just to run out. HELP!
 
Unplug the machine and pull it out from the wall. Open up the back and pull out the six or so little white tabs on the pcb cage that is hanging off the left wall inside the back of the cab. Now disconnect the two wire harnesses attached to that rectangular metal piece that you just unbuttoned and carefully pull the pcb out of its cage. Once it's out of the machine, lay the pcb down on something flat and look around for the rows of tiny dip-switches on the motherboard - you can't miss them unless you don't have eyes. Finally, adjust the dips as per the instructions above and then put everything back together as it was. ...and Voila! - You've got freeplay!
 
thanks to EVERYONE now i have unlimited free play. Mu 6 year old and i love you all!!!!! this site is the best for sure!!!! again thanks!
 
Back
Top Bottom