How to mount a monitor for Popeye in a nintendo cab

squall280

Active member
Joined
Mar 19, 2010
Messages
1,382
Reaction score
19
Location
Pennsylvania
How to mount a monitor for Popeye in a nintendo cab

Here's the low down. Got a Converted Capcom Bowling that is sitting in an old Donkey Kong Cab. What i want to do is since I have everythign to convert back to popeye is to turn the monitor. never did it before. can anyone help me? is it easy to do?
 
Not sure about a different monitor.
I would think you could easily make a couple brackets to connect the monitor to the horiz. brackets,if the mounting holes on the monitor don't line up with the ones on the brackets.
They are only $15 a set + shipping and mount using the extra 3 holes on each side of the cab.
That is the way I would do it.
Either you use those brackets or make your own.
 
do yo uhave a picture of a montior mount inside the cab so i knwo what holes to use on the machine?
 
do yo uhave a picture of a montior mount inside the cab so i knwo what holes to use on the machine?

Not a horizontal mount.
Your cab should have 5 holes on each side.
The 3 that are together are the only ones needed for horizontal mounting.
The 2 near the back edge of the cab are only for vertical mounting.
If your cab only has 2 on each side then you need to drill the 3 for horizontal mounts.
I don't know the exact position for the holes since mine were filled before painting.
 
Back
Top Bottom