How to latch GT Fore control panel

pcnerd

Member
Joined
Aug 29, 2010
Messages
239
Reaction score
0
Location
Tracy, California
Ok I feel somewhat stupid for asking this question, but here it goes. I cant for the life of me figure out how to engage the the two latches underneith the control panel of my Golden Tee Fore complete to lock it down. Its a dedicated IT cabinet (with the white sides). There is no access from the coin door into the control panel. The only way I see is reaching in from behind the cabinet, but I cant reach in that far. I tried and messed up my back doing so! There has got to be a way to do it but I cant seem to figure it out!
 
Ok I feel somewhat stupid for asking this question, but here it goes. I cant for the life of me figure out how to engage the the two latches underneith the control panel of my Golden Tee Fore complete to lock it down. Its a dedicated IT cabinet (with the white sides). There is no access from the coin door into the control panel. The only way I see is reaching in from behind the cabinet, but I cant reach in that far. I tried and messed up my back doing so! There has got to be a way to do it but I cant seem to figure it out!

You have to do it with the lower clamps unlocked... Slide the whole board tray out enough so that you can reach behind the control panel and up.

You lock the control panel locks first, then drop the board tray down and lock the lowers.
 
Thank Tok! I will try that tomorrow. I was thinking somthing along the lines of that but wasnt sure it would work.
 
Back
Top Bottom