How to disassemble a Hydro thunder?

Ghostlyguy

Well-known member

Donor 2013
Joined
Oct 3, 2009
Messages
5,834
Reaction score
690
Can you remove the platform that the seat on a Hydro thunder is mounted to?

Thanks.
 
Yes the platform removes and can roll separetly. If I recall, there are two sets of two bolts on either side of the cabinet base. Unthread them and pull straight out.
 
Exactly... there's (ideally) 4 screws on each side, connecting the seat platform to rails screwed to the inside of the main half.

DogP
 
there are wires that pass from the front to the seat.. So separte the seat platform from the cabinet and then disconnect the wires. you should have a few inches to work with, but be careful.
 
Thank you guy's so much! But turn's out the seat was already detached, un-properly. So the cabinet's going to need surgery.
 
Back
Top Bottom