How to connect MARS dollar bill accepter to KI2

SilverDuck

New member
Joined
May 27, 2009
Messages
2,389
Reaction score
18
Location
Minnesota
I have a Mars AE 2631 D5 dba from a Golden Tee machine. I want to put the dba in a Killer Instinct 2. KI2 has never had a dba, just coin mechs. The coin door is a 09-50000 series. Can this be done, and where do I wire to/from? The dba works in the Golden Tee machine, so I'm guessing it can work in the KI2. The coin door has pop-outs for a dba, it's just the wiring that has me confused.

Thanks
 
Ok, I have the wiring figured out, but the coin door opening is not correct for my acceptor. FML
 
What type of dba do I need for this thing? My 2600 series is way too tall. It seems like this game uses a dba without a stacker, and the bills fall through a chute into the coin bucket. I've only ever used dba's with stackers.

Any ideas?
 
Find a different way to mount it? Turn it upside down?

Normally, I just make a new connector for the side and connect the power, then connect the Normally Open and Switch Ground pins to the wires connected to the coin switches, and everything works just fine...
 
It's too tall for the coin door. The only way to mount it would be to cut a hole in the cabinet beside the coin door. I hate to do that.
 
Is this what I need?
%21B%283YZTw%21mk%7E$%28KGrHgoH-DEEjlLl1RtcBKees%28PV%21%21%7E%7E_12.JPG
 
Back
Top Bottom