Museum of the Game® & International Arcade Museum® Forums

Its strong, stable and looks decent. It would be able to survive some fairly heavy impacts and not go anywhere.
This is how I do them which is automatically included in the repair service for the black and white monitor board platters that uses the multi cap cans.
********************************************************
Also good idea to put a lasso tightly around the flyback / hv unit if you are shipping it. you really want to prevent movement that causes back and forth bending onto those hair wires fraying off the high voltage unit..
Here I am using kapton tape.
having it sever off from the high voltage unit casing is not a great thing. I have seen these banged off from there before. the cardboard around the ferrite core is stock, the goop on the transformer was done by someone else already there. although I dont think that was doing anything functional.
********************************************************
8C4A0816.JPG8C4A0819.JPG

8C4A0824.JPG8C4A0823.JPG
Back
Top Bottom