How do you convert an Emergency Call Ambulance to a Daytona USA 2?

TheBasement

Well-known member
Joined
Feb 22, 2008
Messages
2,729
Reaction score
341
Location
Warrenton, Missouri
How do you convert an Emergency Call Ambulance to a Daytona USA 2?

I realize a lot of Emergency Call Ambulance games were conversions from a Daytona USA 2 game. The cab is the same and the board is the same. Other than marquee and stickers what kind of ROM swaps need to be done and were can I get them? The standard sit-down cab I have is yellow, same as Daytona USA 2. I haven't checked the board yet, but I realize the Daytona USA 2 also has an extra sound card (DSB2) which may be left in there if it was a conversion. Can someone lead me in the right direction?

Radiac, I know you are the expert on Sega racers feel free to add any information I don't know.

eca1b.jpg
 
That cab is a D2 conversion. It looks like it has the original D2 artwork underneath the side art. I'm assuming you bought that from Palmentere in KC. IF so, it is an old Namco owned game, and you most likely still have the DSB2 soundboard in there with the Daytona sound roms. Open up the board area and look for a caged boardset just forward of the power supply. That is the soundboard.

As for converting it, you will need the Daytona roms and the security board. All roms will have to be swapped (41 I think). You could also put Sega Rally 2 in that cab, which might be easier as Rally doesn't require a security board. It will, however, require DSB2 roms and a different drive board rom.
 
Back
Top Bottom