How do I use this EPROM burner

Tenn_pin

New member
Joined
Dec 28, 2008
Messages
101
Reaction score
0
Location
La Vergne, Tennessee
I bought a Pocket Programmer 3, DL the software, but cannot seem to get past that. I am a pin guy that has never messed with the EPROMS until now. Is there a step by step process? Where and how do I find/use the info for a specific game? I looked back through the archives and could not find anything. The guys at Transtronics were great over the phone when I ordered, but I was on vacation at that time and cannot call them during the day. If someone could list in detail, I am sure more than myself would benifit.

Thanks,
R
 
I would use a 27128 or 27256 to test. Dload program called Winrom to verify data.

Dload mame roms. Find a set that uses 27128 or 27256 and burn few. Read/save rom image after burn from the rom. Verify saved image in winrom. If winrom shows what rom/game it is.. you got a good burn.

Kevin
 
Well, there is a lot of variation in what can be done. I have a PP2a so I am not sure how different the software looks. More or less:

Choose the correct EPROM type. Make sure you get this correct as that dictates size and programming voltage. If you get the size wrong, no biggie. Programming voltage to high...smoked chip.

I clear my buffer by loading all FF.

Open the ROM file.

Move the buffer to the part (program it).

If auto verify is on it will verify and give you a green indicator. I like to click the verify just because.

Beyond that, the FAQ's are pretty good. I was up and programming before I read through them but still found them helpful.

http://wiki.xtronics.com/index.php/Pocket_Programmer

There also used to be a TXT FAQ that had some good info in the program directory. I would definitly check it out. Its been a long time sice I read itbutI seem to recall a button for button explnation of each button and a walk through of how to program.
 
Thanks Brent

Tx for the reply. Where do I get the program for my game, Rastan? Is there a site to download the info that explains how to save it to my HD?

Thanks,
R
 
http://maws.mameworld.info/maws

At the top left is a field for search. Type in "Rastan" and hit enter. Find the version you want (sometimes there are a few different ones) and you will see the "file name"

If you wanted the US set #1 for Rastan, that would be "rastanu"

Open Google and search for "rastanu.zip" and you'll find places to download it.

HOWEVER... You can't mix & match ROM sets. Either ID the one that is on the board already and replace the bad ROMs or replace the ROMs as a set.
 
Back
Top Bottom