How do I center my Asteroids?

toolguy

New member
Joined
Apr 6, 2010
Messages
1,616
Reaction score
17
Location
Michigan
Could someone possibly help? I just realized my Asteroids cabaret, 13 inch G05 pic, needs to come over to the left about a half an inch. The right side is fine and of course when I adjust the horizontal POT, it moves both the left and right sides, which is not what I need.

Seems I need to center it, and then move the horizontal pot.

How do I center?

From the manual it sounds like around the yoke, but I cannot find a yoke adjusting lever similar to them on my WG4600.

Thanks,
 
Last edited:
They are different. The centering tabs are mounted on the back side of the yoke. Look for a couple metal tabs sticking out. One rotates to move up and down, and the other rotates to move left and right.

A few years ago someone posted pics of what they look like, but I haven't been able to find it since the forum upgrade...
 
OK well thanks for looking mod and you pointed me in the correct verified direction.

I'll check it out again and possibly try what I saw. I did see one metal ring with a tab on it, but it was rather small. Maybe that's just they way it is.
 
As follow up to this thread, last night I looked at my monitor again and found a thin metal ring with small tab near the neck. I adjusted it and that was the correct one, it moved the pic to where I wanted it.

There was another ring and tab but it still had the factory glue on it, so I left that one alone.
 
Back
Top Bottom