House of the Dead 4 gun problem

AtariShag

Member
Joined
Feb 14, 2005
Messages
925
Reaction score
16
Location
Utah
I have a gun on a House of the Dead 4 (62" version so it uses the LED sensors) that I have problems with. At the moment the game doesn't see the gun, there are no crosshairs in the test menus. I took it to a tech who rebuilt the wire harness from scratch and it worked for a day after I plugged it in then it suddenly stopped. I took it back to the tech and he couldn't figure it out and suggested I buy a wire harness directly from sega but they want $240 for a new one - I'd rather find an alternative if possible.

In looking at the harness, there is a ground wire missing from the connector. I put one in but I ground it and nothing happens. I look at my other, working gun and it has the ground wire there which goes into the cable but there is no ground wire coming out of the other end - it terminates somewhere inside of the cable I assume. Anyone know where this ground is supposed to go? Does it jumper with another wire?

Many thanks in advance
 
Back
Top Bottom