Hooking up jamma start button.

Dave27

Active member
Joined
Aug 17, 2006
Messages
2,303
Reaction score
1
Location
Snohomish, Washington
Can I use my start button as an action button for my jamma setup,I thought I have read on here befor that you can use buttons for double purpose. The switch has 3 prongs obviosly 1 goes to ground, the other is for the start wire,will it work to run the action wire to that last prong.....Thanks....Dave
 
You can't run the wire to the other button, unless you want the switch to be actuated except when depressed. That connection is a 'normally closed' position. You can just run two wires parallel through the 'normally closed' position. This will not affect most Jamma games, but I can't speak for all of them.
 
Back
Top Bottom