Hooking Up A GD Rom In A Sega Naomi System...

jonnyb

New member
Joined
Sep 3, 2008
Messages
77
Reaction score
0
Location
Virginia
Hello All:
I was able to successfully get my Star Wars Racer board tested using my Naomi Royal Rumble set up. Now I want to hook up the Naomi 2 to it with the DIM board and the GD Rom using the existing Royal Rumble wiring and power supply. The Naomi motherboard is fairly obvious as far as connections go, but on the GD Rom, I know the printer-like cable goes from the player and to the DIM board, and one end of the power cable goes to the player, but where specifically do I hook the other end of the cable (red, yellow and white wire with a connector) to get the player running? Any useful input appreciated.
 
I can check for you, give me a few. I don't think it makes a difference if it's just a NAOMI 1, I think the rest hooks up the same, just the DIM cards would probably differ or something.

EDIT: looks like it has a connector that goes to the NAOMI power supply. if you don't have the original power supply, you won't be able to run this, as you need 3.3V. it's like a Sega-ish molex connector that plugs into the PSU, and looks like it has the mainboard power going to it too.
 
Last edited:
Back
Top Bottom