High Speed diceast police cars mod

arakisssun

Member
Joined
Mar 3, 2010
Messages
976
Reaction score
8
Location
Varna, Varna, Bulgaria
Today I finished my mod of the diecast dodge police cars.I'm very tired now,but tomorrow I will post everything that I done inlcuding video of final result
 
Diecast police car Dodge '78 by Matchbox

http://i891.photobucket.com/albums/ac119/arakissun/Dodge.jpg



Add some additional decoration

http://i891.photobucket.com/albums/ac119/arakissun/Picture035-1.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture034-1.jpg



This was the easy part.Now with the hard

I removed the red bar from the celinig and make a little canals in it-one for the left lights and one for the right lights.After that I placed two little RED SMD LEDs 0805 at the left side(left canal) and two at the right side(right canal) of the bar.This was pain:)
After that I connect this two groups of LEDs to scheme that make them flash one by one

http://i891.photobucket.com/albums/ac119/arakissun/Picture032-1.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture031-1.jpg



For lights at the front I used two COLD WHITE SMD LEDs 3850

http://i891.photobucket.com/albums/ac119/arakissun/Picture14.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture010-5.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture07.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture007-8.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture004-6.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture006-11.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture01.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture001-9.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture014-5.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture013-5.jpg



All +12v adn GND of the LEDs are connect directly to the RELAY that secure the power of the RED BEACON,so when the beacon begin to spin every car to light up too.For my luck RELAY secure 12v from the one side.

http://i891.photobucket.com/albums/ac119/arakissun/Picture011-4.jpg



I had printplate that I used before for the ramp mods with led and now used it too to make the connetions of this mod(up side connectors-greens are GND,mddle is the POWER SUPPLY from the RELAY,blues are the POWER SUPPLY for the LEDs)

http://i891.photobucket.com/albums/ac119/arakissun/Picture028-2.jpg
http://i891.photobucket.com/albums/ac119/arakissun/Picture027-4.jpg



Result
http://s891.photobucket.com/albums/ac119/arakissun/?action=view&current=Picture037-1.mp4
http://s891.photobucket.com/albums/ac119/arakissun/?action=view&current=Picture036-2.mp4
http://s891.photobucket.com/albums/ac119/arakissun/?action=view&current=Picture035-2.mp4
http://s891.photobucket.com/albums/ac119/arakissun/?action=view&current=Picture034-2.mp4
 
Looks great!

I think you could sell these in a package for a solid $80-$100 easy. Just basing that off many other mods I frequently see for much higher as well. High speed is a solid choice as there are tons of them around
 
Back
Top Bottom