Hello, I'm moving out my high speed pin, what I know about it:
It came to me from a long time home owner but it had never been serviced.
The good: it's a working pin, here's what's been done since in my possession…
New left flipper bat
New rubbers (some done, rest I have to go with it minus the large one in the way back)
Reflow of solder on connectors on the CPU, flipper power board, and power supply
Minor cleanup underneath the playfield.
Transistor replaced that controls the special solenoids
The bad:
Playfield needs to be restored, I was going to put a hard top on but read that people would rather restore the playfield so I held off.
Needs new pop bumper caps, and one light on the top pop bumper.
Sometimes on power up the game doesn't fully boot, turning it off and back on fixes it when that does happen.
If you have any questions feel free to send a message, prefer local so you can see the pin but will ship if you set it up.
$2100 OBO (cross posted to pinside)