Help!

punxkid10000

New member
Joined
Oct 30, 2009
Messages
13
Reaction score
0
Location
North Carolina
I just purchased a 138 in 1 multi cart for my neo geo machine and it doesn't work. The games start, start again, start, terrible sound, and the directions are in engrish so I'm kind of lost. Any help?

Thanks
 
do you have an original large one slot board? Many of the multi carts have problems playing on the orig boards.

Upgrading to a newer one slot board.. which is very small, almost as small as the cart, seems to solve this problem of resetting.

The newer multi carts are supposed to run better on the original boards...


or you could just have a bad cart...

I think user "nixs" here sells these... and he has some insight on the problem.. you can ask him...
 
I hate to even say this, because it may look like I'm insulting your arcade intelligence. But you made sure that it was inserted in the right direction, installed tightly, and no garbage in the motherboard slot, right?
 
Hey guys, many thanks. By the grace of God I got I turned it on and it worked! This was the case for about 4 weeks. Now the screen is fuzzy/seems to be out of focus.... Any suggestions, sorry but I'm new to the whole arcade thing. I'll try to make sure that there is no dust or junk on the board.
 
make sure you have the sub board plugged in,fuzzy pix maybe the flyback focus needs adjusted on the monitor
the flyback has the red wire going to the suction cup on the picture tube
there are 2 knobs on it ,top knob is the focus,bottom is the brightness
 
make sure you have the sub board plugged in,fuzzy pix maybe the flyback focus needs adjusted on the monitor
the flyback has the red wire going to the suction cup on the picture tube
there are 2 knobs on it ,top knob is the focus,bottom is the brightness

many thanks, I'll give it a shot.
 
Back
Top Bottom