Help with WG K7302 connector/harness

twistedsymphony

Well-known member

Donor 2013
Joined
Feb 7, 2013
Messages
2,023
Reaction score
79
I have a Revenge From Mars Pinball with a WG K7302 monitor. I pulled the chassis to recap it and part way through the process I noticed this damage on the harness for the remote board:

attachment.php


This harness is really stiff/brittle so I wouldn't be surprised if there are other damage.

Does anyone have or know where I can get a replacement harness or at very least what model number the connectors/pins are so I can crimp a new one myself?

the connectors look like this:
attachment.php

attachment.php


Any help would be greatly appreciated :)
 

Attachments

  • wgk7302_hd_1.jpg
    wgk7302_hd_1.jpg
    149.5 KB · Views: 30
  • wgk7302_hd_2.jpg
    wgk7302_hd_2.jpg
    169 KB · Views: 29
  • wgk7302_hd_3.jpg
    wgk7302_hd_3.jpg
    126.9 KB · Views: 29
Several connectors that look like that.
What is the pin spacing on that connector?
 
Several connectors that look like that.
What is the pin spacing on that connector?

I went though all of digikey and I couldn't find any with that shape clip or alignment tabs offset from the end like this so if you know something that matches even that I'm interested.

spacing is .1in
 
Back
Top Bottom