Help with T2 guns - very jerky

BristolMartin

Member

Donor 2012
Joined
Apr 26, 2012
Messages
65
Reaction score
0
Location
none, United Kingdom
HI all. Just got a T2 Cab in good condition but both guns are very jerky in came and calibration. Popped off the cowling and did a gun calibration and used a screwdriver to turn pots and its not smooth. Can I safely assume its the Pots? If so, does anyone know the replacement as mine have 2 pots on each axis?!?

Thanks a lot

Martin - UK
 
HI all. Just got a T2 Cab in good condition but both guns are very jerky in came and calibration. Popped off the cowling and did a gun calibration and used a screwdriver to turn pots and its not smooth. Can I safely assume its the Pots? If so, does anyone know the replacement as mine have 2 pots on each axis?!?

Thanks a lot

Martin - UK

Pots are typically $25 each or more for the exact type. However, you can saw down cheap $3 Radio Shack pots which will do the trick.
 
Definitely check for broken solder or wires. Are the pots correct value? Maybe some dummy put in wrong pots.

Other than that... Um low voltage perhaps
 
Back
Top Bottom