If I wanted to put this in a Pacman or Ms. Pac cabinet what do I need to do about power?
The pinout is the same, but this board was intended for a SuperPac cabinet
They sold 2 versions of the board for conversions. This is the DC board.
I found pinouts and such. I would just rather not cut wires in the original harness
A socket for the board and a fingerboard and just break the power connections and wire to a switcher?
tia!
The pinout is the same, but this board was intended for a SuperPac cabinet
They sold 2 versions of the board for conversions. This is the DC board.
I found pinouts and such. I would just rather not cut wires in the original harness
A socket for the board and a fingerboard and just break the power connections and wire to a switcher?
tia!
