Help with Daytona USA

louismoore

New member

Donor 2012
Joined
Feb 29, 2012
Messages
1
Reaction score
0
Location
Michigan
Hey All,

I am helping a friend out who runs these machines in Australia. It is a twin Daytona USA.

The monitor on the L/H machine switches on but the images is nothing but broken blue and red squares that are jagged and uneven. Adjusting the phases of the moniter can switch it to a solid white with black lines through it in which you can just make out the sega logo in the lower r/h corner of the screen.

I pulled the machine apart and it looks like some one has spilled some coke over the PCB board, specifically the second lowest board had some tracking etc... on, the row LED lights, red and green on this board so not light up when the machine is on (not sure if they are supposed to or not, the single red LED, the one not in the row, on this board does light up).

Any ideas on what this could be and how to test it?????? PLLLLEEEEAAASSEEEEEE HELP
 
It sounds like you may have a board issue, but we're gonna need a picture of what it's doing now to be sure.
 
Back
Top Bottom