Help with a arcade shop programmable jamma board

Westcb

Active member

Donor 2011
Joined
Dec 21, 2011
Messages
1,697
Reaction score
10
Location
Tennessee
I got a older arcade shop programmable jamma board and for some reason button 2 on joystick 1 is permanently activated (it is not the wiring, tried in different cabinets). This was not a problem with the games before because button 2 and 3 werent used nor did they do anything, but when I updated the games with sysmenu 6.3 now buttons 2 and 3 are actually working which is causing button 2 to mess up all the games. ie. cant jump in donkey kong because button 1 and 2 now both control jumping where before button 2 and 3 do not. Does anyone have a copy of a much older version? The older version I had before did not make any mention of LED buttons in the program option on the board. I guess the better question would be does anyone know a way to fix the problem with button 2 but at this point older software would bandaid the problem so I could get back on some Donkey Kong. :) Any help would be greatly appreciated.
 
Back
Top Bottom