Help Wiring a Slap Fight PCB

Wldfire

Well-known member

Donor 5 years: 2011-2014, 2016
Joined
Oct 11, 2011
Messages
1,319
Reaction score
139
Location
Tahsis, BC, Canada
Hi, hoping someone can help me with this.
I have a game board that is marked in marker as a Slap Fight on it.
I have downloaded the manual and printed off the PCB connection page.
Here is my problem the Manuals i can find all show the connector as having 28pins yet the board I have is 22 pins.
I am not sure if i am not understanding something right or what is up.
I appreciate any and all information and Help.
Thank you
Ken
slapfightedge.jpg


slapfight1.jpg

slapfight2.jpg
 
Awww okay, i was starting to wonder if i was just missing something on hooking it up or what. LOL Wouldn't you just know it was a bootleg.
Thanks for that info, hopefully someone can help with a pinout.
Thanks!

It's a boot. Hopefully someone will have the pinout for it.
 
It does look similar, but I don't believe it's the same as either of them.

If you look at the edge connector on your board it has 2 sets of pins connected on each side. The first board has 2 sets of connected pins both right next to each other. It is also missing the locations yours has silkscreened onto it.

The second board appears to have a key, whereas yours doesn't. It also has GX-006 silkscreened onto the board, which your one doesn't have.
 
Thats what i was just noticing. Pulled up a large version of my board in one PC Monitor and the site on the other. So close yet so far. LOL
The pinouts on each board are so radically different also. I may have to put this board aside and do allot more digging so i don't blow it up. LOL
Thanks for your help!
 
Back
Top Bottom