help. wgv1000 monitor caps

security0001

Well-known member

Donor 6 years: 2020-2025
Joined
Jan 10, 2011
Messages
9,349
Reaction score
2,811
Location
Montana
i am recapping a v1000 monitor and the bob roberts cap kit has two caps that are listed for C211 1uf16v and the old cap is a 1uf50v and also C219 it listed as 220uf16v and the old cap is a 150uf10v. whats up should i replace with what bob roberts lists or find the correct ones??? thanks
 
C211 is odd for Bob to send a 16 volt replacement. My notes show it as a 50 volt cap (like your original).

Regarding C219, Bob has always sent a 220µf cap, as opposed to the 150µf original cap. You can still purchase 150µf caps, though, it's not a "standard" size. I'd guess, Bob doesn't feel the need to stock it.....and 220µf is probably acceptable. The later revisions (P292) of that board actually use a 220µf cap (along with some other changes). Bob could be making his cap kits off of this board/revision.

Edward
 
caps

so your saying c219 replace with the 220uf and the c211 put a 50v 1uf back in and don't use the one in the kit that is only 16v??
thanks
 
The 220µf should be fine......I wouldn't use the 1µf16V.......I'd go to Radio Shack, or somewhere and try to find a 50V.

Edward
 
Back
Top Bottom