Help w/hook display

HAVASUGAMEMAN

Member
Joined
Nov 11, 2002
Messages
559
Reaction score
1
Location
lake havasu city, Arizona
is there anybody out there that can repair this display? it is the one that is so hard to find. and can only find a new one from company in germany $300 plus .it is not totallly dead but has some wave like issues only missing part of some areas? thanks -james
 
is there anybody out there that can repair this display? it is the one that is so hard to find. and can only find a new one from company in germany $300 plus .it is not totallly dead but has some wave like issues only missing part of some areas? thanks -james

If it's the glass display only that's the issue, you can buy those from Pinball Life for $130+.
 
Do the easy stuff first like reseating the ribbon cable on both ends as they are prone to oxidation.
Otherwise (FROM RGP)
Find R95 on the display driver board and cut it off up by the ceramic knob
leaving the wires stick out of the board. Using a 1/2 watt 33K resistor
(get it from Radio Shack or Mouser Electronic on the web) solder it to
the wires you left sticking up.

Good luck
 
Back
Top Bottom