Help vectoring a small piece of art

shirkle

Active member
Joined
Jan 6, 2003
Messages
1,612
Reaction score
5
Location
Virginia
Would someone be willing to help me vectorize a small image that I need in a bubble hockey restoration?

The image is in the below, but I will send a photoshop file of one that I scanned and touched up. It's only about 2.5" tall and wide. Pretty small. It's just not available anywhere from what I can tell. I peeled one off of my machine, but it was missing some chunks and I filled them it the best I could.

In this link/image, it is the tiny AHA USA "shield" on either side of the Chexx sign.
http://media.liveauctiongroup.net/i/5774/8652488_1.jpg?v=8CC26C1CC4B5530


If you're willing to help, pm me an email address and I'll send you the file.
 
I need a couple of those shields too, if you make some extras please let me know I will pp you cash for em!
 
been meaning to post a follow up here
I vectored this one and have allready printed it out.
solvent inkjet and plotter cut
IMG_4041b.jpg
 
A second request....
Anyone feel like taking this one on:
 

Attachments

  • USA LOGO.jpg
    USA LOGO.jpg
    92 KB · Views: 20
I'll see if I can do that.
I'll have to peel it off to scan it, so hopefully it will come off in one piece.

For this one, there are two different sizes, which you can see in the link on my original post. There's the small size like you see on the coin door, which I can measure. Then there are two bigger ones that go on the cabinet that are approximately 10.25" x 8.5". My cabinet is missing one on the front coin door, and both of the big ones. Luckily the one on the back coin/pcb door is still there.

I'll send the scan over later today if I can.
 
Back
Top Bottom