Help please. Playchoice 10 monitor removal

jonathan1138

Active member
Joined
Jul 20, 2010
Messages
1,648
Reaction score
7
Location
Whitestone, New York
Ok - ive recapped many G07, Amplifones and WG4900.

The same fears that i had when pulling those chasis's the first time (Which i can do in my sleep now!) i have with these Sanyo monitors - they seem a little more complicated?

Any resource to explain how to pull these two (top, bottom) out for Cap kits? Any tips?

I searched here but didnt find much (or getting confused search for DK monitors - are they the same?).

I havent checked the manual (dont have one / can search online though) - do they have a good overview?
 
It's pretty easy to do.

1.Remove back door and unplug monitors.
2.Open coin door and release control panel.
3.Remove control panel.
4.Remove plexi if 1 piece, otherwise remove lower glass, bracket, then upper glass.
5.Monitors are held in with 4 bolts each. Remove and pull monitors out the front.

-Barry
 
you might have to slide them first before taking them out. I forget if the mounting brackets are the same as they'd be on Popeye/DK/etc., but there's like a little lip on the monitor that locks into the mounting bracket on one side.
 
Back
Top Bottom