Help...No sound from Rowe MM5? :(

philt80

Active member
Joined
Aug 11, 2011
Messages
993
Reaction score
144
Location
Virginia
My folks picked up a Rowe MM5 juke today and sound was only coming from the right channel. Upon inspection, I noticed a wire was detached from the connector leading to the left and right channels. After resoldering all points from the arm to the connector, I now get no sound at all from either speaker.

I assumed I was doing a good thing attempting to fix the hacked solder job, but I guess in my tinkering I am missing something.

Anyone have any ideas on what might be the issue?
 
Last edited:
Answering my own post. There was a loose pin connecting to the needle itself.
"Dummy attack", but glad that it is now fully functioning :)
 
Back
Top Bottom