Help needed to find part for Wico Pattern Generator

Wldfire

Well-known member

Donor 5 years: 2011-2014, 2016
Joined
Oct 11, 2011
Messages
1,319
Reaction score
139
Location
Tahsis, BC, Canada
Help needed to find part for Wico Pattern Generator

Hello, I am hoping someone here can help me track down a replacement switch or equivalent switch for a Wico Pattern Generator I just got off a member on here. I knew when i purchased it, that the rotary switch was crappy. I was taking it apart today and it litterly fell apart. LOL
It is a 5 position, 10 Pin with one center pin round Switch. Made by AlcoSwitch MRS-1-10
150MA of 115VAC

I have been trying to track this item down with no success. So am wondering if anyone can help me out. I would like to get a replacement like it, or even a switch i can mount into the front case part and just wire to the contacts on the board.
I have included a few pictures of it to help.

any help on this is very much appreciated!
Thank you
Ken
 

Attachments

  • switch1.jpg
    switch1.jpg
    93.8 KB · Views: 20
  • switch2.jpg
    switch2.jpg
    97.3 KB · Views: 16
How's this for a start?

http://www.mouser.com/ProductDetail...=sGAEpiMZZMvNbjZ2WlReYgfl1vEqXQaLwRqC849/5y8=
Mxxx.jpg
 
WOW! That was fast! LOL and 5 or 5 position doesn't matter as the 6th just wont be used.
do you think this one would work as a replacement switch for the original if i wire it in?
I appreciate you taking the time to look that up!
Thank You
Ken
 
Hey, No problem. That's why we are here to help out.
Let us know how it works out..
Keith


WOW! That was fast! LOL and 5 or 5 position doesn't matter as the 6th just wont be used.
do you think this one would work as a replacement switch for the original if i wire it in?
I appreciate you taking the time to look that up!
Thank You
Ken
 
I will, thanks! Will see about getting one and then need to wire it in. The switch came apart, but i think i have it back in the right place. Board is marked with a 1 beside one of the pins of the switch so assuming thats to mark Pin 1. Don't want to wire it wrong. LOL
 

Attachments

  • switch3.jpg
    switch3.jpg
    106.8 KB · Views: 6
Thank you Ken! I appreciate that link!
Will be nice to get this unit going. :)
Thanks everyone for always being so helpful! :)
 
Back
Top Bottom