HELP: My SF2 keeps blowing a display Fuse!

qbass187

Well-known member
Joined
Jan 17, 2010
Messages
3,228
Reaction score
189
Location
Suffield, Connecticut
Hey guys,
I've been trying to figure out why my Gottlieb Street Fighter 2 keeps blowing a fuse every time I turn it on. It the F3 fuse for the display and when it's blowen I can't get -100vdc or -112vdc on the DMD connector.

Does anyone have any experience with these?

Thanks!

ERIC
 
Last edited:
Hey guys,
I've been trying to figure out why my Gottlieb Street Fighter 2 keeps blowing a fuse every time I turn it on. It the F3 fuse for the display and when it's blowen I can't get -100vdc or -112vdc on the DMD connector.

Does anyone have any experience with these?

Thanks!

ERIC

Every blown fuse I had on my SF2 pin was from a short circuit somewhere. Did you go through the line from F3 to the display to see if anything is loose or touching? It's a pain, but I'd start there.

Also, just a FYI: don't plug/unplug the display from the board while the game is on. Supposedly it is a very bad idea to do that on System 3's.
 
Back
Top Bottom