Help me with my G07 and frogger

THEDJ

New member
Joined
Oct 20, 2008
Messages
520
Reaction score
4
Location
SOUTHPORT, Indiana
HELP!!!!!


I can get my G07 to synce with my 36 pin frogger.


Best i can get is a slow rolling picture.


can some one please map out the pins for me.


monitor --- game
red -------- red
blue ------- blue
green ------ green

?????? what pins.

I dont what the pin outs are so give me the basics.

thanks
chris
 
My Frogger...

Chris -

My Frogger has a Nanao monitor in it (stock Sega monitor), BUT, I can tell you that you are going to need a sync signal from the PCB to make it work. There should be pinouts for the sega pcb available...check Mikesarcade.com.

I believe the G07 is going to need a composite sync (might take - sync), and it is a small connector just above the R-G-B connector.

You monitor guys please correct me if I am wrong.

-scott
 
Here is the Frogger pinout...

Frogger Pinouts
---------------
Typed by : Tom Newzek

A is soldering side
B is parts side

A1 -5VDC
A2 SPEAKER
A3 2P SW1
A4 2P LEFT
A5 1P START
A6
A7 1P SW1
A8 1P RIGHT
A9 1P UP
A10 COIN 1
A11 1P DOWN
A12
A13 VIDEO GREEN
A14 VIDEO RED
A15
A16 GROUND
A17 GROUND
A18 +5VDC

B1 12VDC
B2 SPEAKER
B3
B4 2P RIGHT
B5 2P START
B6 2P UP
B7 TEST
B8 1P LEFT
B9 2P DOWN
B10 COIN 2
B11 COUNTER 1
B12 COUNTER 2
B13 VIDEO BLUE
B14 SYNC
B15
B16 GROUND
B17 GROUND
B18 +5VDC
 
monitor pin

So what pin on the monitor (g07) do i connect too.

i have the manual for the frogger.


thanks
chris
 
Back
Top Bottom