help me source this molding..

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
I have searched the net for about 2 hours tonight, to no avail. It's possible it doesn't exist anymore. It was used on Atari games, it seperated the bezel from the marquee on,

Paperboy
Major Havoc
Firefox Upright
Return of the Jedi
I, robot

Here's what the end of it looks like:

MHspecialmolding003.jpg
 
It's also used on A.P.B., Cyberball, 720 & Vindicators. I have not found a source either. The spine on that molding on my 720 was cracked off. I had to dig it all out of the slot and use plastic epoxy to reattach it. I ended up gorilla gluing the molding to the cabinet in addition because I didn't trust the epoxy to hold the weight of the glass. It's worked so far. I think this would be a great piece to reproduce as it's used on so many Atari cabinets.
 
Last edited:
If outwater dosnt have it it proably hasnt been done
whats the overall interest in this piece maybe Audiomidiman can look into his sources

But Im pretty sure RamControls has it :D
 
It's also used on A.P.B., Cyberball, 720 & Vindicators. I have not found a source either. The spine on that molding on my 720 was cracked off. I had to dig it all out of the slot and use plastic epoxy to reattach it. I ended up gorilla gluing the molding to the cabinet in addition because I didn't trust the epoxy to hold the weight of the glass. It's worked so far. I think this would be a great piece to reproduce as it's used on so many Atari cabinets.

Where is it located on 720?
 
Prok suggested outwater, i couldn't find it. I have also talked to Audiomidiman about going through his source so i can have these ran sometime this year. I think it's PVC, it's definately not the same stuff as T-Molding
 
Contacted outwater directly, and emailed photos. They are positive they don't have it.
 
Back
Top Bottom