help looking for a manual/also MCRII question

wickedbass

Active member
Joined
Nov 15, 2008
Messages
2,586
Reaction score
8
Location
Massachusetts
im looking for the pinouts for my UR DOT. a manual would be great but pinouts would be a nice start.

Also how is MCRII different from say tron and spyhunter. seems they use the same PS right? i know you can test a SH in a tron, can you test a DOT in a Tron?

-Thanks
 
Throughout the MCR series there is slight differences...different SSIO boards, different CPU boards, etc. I believe the video generators boards are all the same....but don't hold me to that.

Yes, the power supplies are all interchangable. There is different revisions, so they all don't look the same....very close, but not exact.

As for testing....The power input is the same and the video output is the same. You can power any MCR three board sandwich up in any MCR machine. I'm not for sure about the later MCR mono-boards.

Edward
 
i think you could test a DOT in a tron no problem, except for the missing button.

You can get the manual for DOT and tron here -
http://arcarc.xmission.com/ its in the bally midway section.

pinouts for tron - http://www.mikesarcade.com/cgi-bin/spies.cgi?action=info

there are differences in the video boards as well - for instance, tron, spy hunter, and kick all use different video boards. the only common board is the ssio - and there are variations on them as well - panning/non panning and some have more stuff populated than others.
 
Back
Top Bottom