help identifying monitor chassis (paperboy)

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,144
Reaction score
2,593
Location
Eureka, California
Kris dropped this off so I could mess without and get it working, I was going to order a cap kit for it, but I couldn't identify the monitor.
Curious the cab is labeled as serial # UR00001, the boards are listed that way as well.
This board is different than my paperboy boy near the bottom where it has a little edge connector in place where mine has some molex pin connectors. His a/rIII board has a huge pot on the left side as well, which m ine doesn't.

Anyway, back to the monitor. love some help identifying it.

the 3rd pic shows agm-20m
 

Attachments

  • 010.jpg
    010.jpg
    87.8 KB · Views: 19
  • 011.jpg
    011.jpg
    89.1 KB · Views: 22
  • 012.jpg
    012.jpg
    87.9 KB · Views: 15
  • 013.jpg
    013.jpg
    90 KB · Views: 18
  • 016.jpg
    016.jpg
    103.1 KB · Views: 15
Last edited:
couple of pics of his board and mine near the bottom and the arIII


pics 1 and2 are showing his edge connector and huge pot on the ariii, pic 3 shows both my lack of edge connector and no pot on the ariii
 

Attachments

  • 014.jpg
    014.jpg
    96.7 KB · Views: 10
  • 015.jpg
    015.jpg
    92 KB · Views: 8
  • 017.jpg
    017.jpg
    94.3 KB · Views: 9
ok, bob has an agm20m on his website, guess I figured that out. Just didn't see it on the monitor id page.
 
If you do a FULL cap kit on it, send me the listing so I can add it to my site...
 
First off Dylan, take off your beer goggles before taking pics.

His board is serial number 1, and it is definitely different from the final production run.

A/R III's come in a couple of different versions with some having the audio pot and some without it.

Functionally, it will work just like yours.
 
First off Dylan, take off your beer goggles before taking pics.

His board is serial number 1, and it is definitely different from the final production run.

A/R III's come in a couple of different versions with some having the audio pot and some without it.

Functionally, it will work just like yours.

yeah that first pic was sketchy. His cab has a matching handwriteen UR00001 (my cab is UR00061) as well. Inside of the cab are some hand written notes with dates like 2/15/85 attached to the harness.
 
Last edited:
Back
Top Bottom